Pneumatic knife gate valve in the dark

• 

PZ673X series Pneumatic knife gate valve in the dark After equipped with electromagnetic valve, prox…

A gate is introduced:
PZ673X series Pneumatic knife gate valve in the dark After equipped with electromagnetic valve, proximity switches and other accessories to complete the motion control and the output signal of the opening and closing position, also can complete automatic control of continuous action. The main use of cast iron, cast steel, stainless steel etc.. The path from DN50 to DN1000. Pneumatic valves are widely used in chemical, coal, sugar, water, paper and other fields, is an ideal sealing valve.
Two, PZ673H Pneumatic knife gate valve in the dark The characteristics of:
1. knife gate slurry, dark rod and rod two; single and double sealing structure sealing structure, full circle design of the DC channel without slag, block. Processed into the bottom plate blade knife blade, a sealing ring with plane floating, floating ball arc metal sealing structure, between the gate and the metal seat is gapless hoist, on soft materials such as fiber, pulp, wood pulp with large shearing force and self-cleaning function, but also has good opening and closing function. The upper blades installed in the hard Teflon wiper can prevent dust and scratch gravel and other substances into the packing box, can significantly increase the life of blades.
2. body, filling culvert are precision casting, the whole body with flange type casting, valve plate made of stainless steel and precision processing can obtain ideal sealing effect of grinding and polishing. Compact design, small occupying space, light weight, easy installation, wear-resistant, non stick slag anti blocking measures to perfect and convenient maintenance and long service life.
3., slurry knife gate valve can be made within the V shape, U shape, triangle channel. V type gate control can be used as a regulator, the connection form of clip, flange lug, metal to metal seal, metal sealing of soft polyurethane, PTFE seal.
The 4. piston pneumatic actuator, powered by compressed air, an air pressure signal of electric - gas valve positioner or solenoid valve input, the pressure thrust on the piston, and the push rod displacement, to achieve linear motion.
5. medium: gold powder, tailings, pulp, wood pulp, fiber, dust, chemicals, sewage treatment tank, ore, slag, coal, asphalt, outlet, fruit, grain, cement slurry, slaughter wastewater etc.. Applicable temperature; soft sealing: (less than 150 DEG C (tetrafluoroethylene), polyurethane is less than or equal to 80 DEG C), seal: less than or equal to 425 DEG C. Working pressure: 0.6 ~ 1.6MPa, nominal diameter: DN40~DN900mm.
Three, Pneumatic knife gate valve in the dark Standard Specification for:
Design and manufacturing standards:
The structure of standard length: GB/T 12221-2005
Flange standard: GB/T 9113
Pressure temperature rating: GB/T 12224-2005
Test standards: GB/T 13927-2008
Four, Pneumatic knife gate valve in the dark Technical parameters:
Nominal pressure: 0.6MPa, 1.0MPa, 1.6MPa, 2.5MPa, 150Lb;
Nominal diameter: DN50~500mm NPS 2 "~20";
Suitable temperature: 0~+200 degrees (the specific temperature range as the sealing material and the properties of the media set);
Flange: ANSI B16.5, GB/T9113, JB/T79, HG, SH, JIS, DIN, NF, BS;
Main material: WCB, ZG1Cr18Ni9Ti, ZG1Cr18Ni12Mo2Ti, CF8, CF8M, CF3, CF3M;
Seal type: hard seal, soft seal;
Leakage: Seal: D (liquid level 0.1 * DN mm3/s): a soft seal (zero leakage);
Pneumatic actuator accessories: 1, installation flange 2, solenoid valve 3, air filter;
Air pressure: 0.4~0.6MPa solenoid valve voltage: DC24V, AC220V.
Five, the implementation of standards:

Six, main parts material:

Seven, the main connection dimensions:

Eight, ordering:
1, customers have special requirements for products, must be in the contract to provide the following instructions:
2, the length of the structure, the connection form of nominal diameter, full size, shrinkage, pipe size, and according to the medium temperature and pressure, test, inspection standards and other requirements
3, if the unit has been selected by the design model of our products, please press the model directly to our sales department order;
4, this field according to the special requirements of customers of all kinds of driving device configuration. If necessary, please contact our technical department.
5, when the occasion is very important, or more complex piping when you try to provide design drawings and detailed parameters by Zhongwei Technology Department audit checks for you.